Tag: rnav

Canadian Ops Update

Just a short update on a few things happening in Canada that you might have missed…

Nationwide
  • There has been a change in the Maximum Indicated Airspeeds for holding patterns to bring them more in line with the rest of the world. This came into effect on 11OCT18 and will be reflected in the 08NOV18 AIP update. Refer AIC 25/18.

  • It’s been over a year and a half since NavCanada suspended it’s Climb/Descend via SID phraseology, adding a complication for pilots that regularly cross the border from USA to Canada and v.v. It initially trialed then quickly suspended them “out of concern over altitude deviations we were seeing in the system and the unforeseen large increase in workload as a result. We are continuing to communicate with airlines, aircraft operators and our employees as we revert to the phraseology rules that were in place prior to this change.​” We understand this phraseology has now been officially put in the trash and wont be returning.
CYYZ/Toronto Pearson Airport
  • There are new nighttime RNAV approaches starting in CYYZ/Toronto Pearson from 08NOV18. These RNAV (GNSS) X instrument approach procedures are for night-time ops between 0030L-0630L on runways 5/6L/6R/23/24L/24R. The procedures are designed to minimize the noise footprint. The ATIS will advertise these as the primary approach type when they are active. Pilots can expect to be cleared directly to the initial approach waypoint, then subsequently cleared for the approach including the appropriate transition. Refer AIC 28/18.

  • Slots are currently required for all flights between 0030-0630 local time. The airport authority was planning to make slots mandatory for all GA/BA flights H24 from Nov 17 onwards, but this will now be delayed to some time in early 2019. For more info, contact the Airport Reservation Office at aro@gtaa.com

Do you know more? Drop us a line!

Great Australian Bight – RNAV/RNP only airways

Australian AIP flight plan requirements (GEN – FPR – 18 – section 7.4) have been updated to remind operators to file the right navigation specifications on their ATC flight plan or risk a re-route for flights over the Great Australian Bight (in the YMMM/Melbourne FIR).

Specifically, for flights operating on the following airways: Q32, Y135, Q33, Q158, Y53.

Aircraft flight planning on these routes should meet the following navigation specifications.

  • RNP2; RNP4; RNAV5 with GNSS or IRS/INS RNAV10 or RNP10.

Aircraft flight planning on these routes without correctly indicating their relevant navigation specification will be re-cleared by ATC on a “more suitable route”.

One to check next time you’re flying through the area, especially for a flight to/from YPPH/Perth.

Further reading:

International Ops Bulletin
Get our weekly Ops Bulletin on changes and dangers: Airport closures, Security issues, ATC restrictions, Airspace changes, and New Charts
Sent to you every Wednesday
Thanks, I'm already a reader.