Common sense and physics tells us that the faster we go, the more dangerous it becomes to reject, rather than get airborne. Once we hit V1 we go, because there may not be enough of the hard stuff in front of us to stop anymore.\u00a0The problem is that reports continue to tell us that avoidable accidents are happening because crew are still rejecting take-offs above V1.\u00a0<\/strong>Which poses an important question: why?<\/p>\n There is no simple answer. But accident and incident reports may hold some clues…<\/p>\n The vast majority of high speed RTOs we practice in the sim are related to engine problems<\/strong>. Failures, flame-outs, bird ingestion, compressor stalls. Those sorts of fun things. They are generally easier to identify and illicit a strong and confident decision to reject the take-off.<\/p>\n But here\u2019s the kicker: Most high speed RTO\u2019s are not caused by engine problems.<\/strong><\/p>\n In fact historically, less than quarter of them are. Which means when something unexpected happens that we haven\u2019t seen before, the Go\/No-Go Decision suddenly becomes a lot more difficult.<\/p>\n Here are some of the other leading causes:<\/strong><\/p>\n A lot can go wrong and the process of detecting, deciding and acting takes time. At high speeds close to V1 this is a problem.<\/strong> Here\u2019s why…<\/p>\n Tire failure – one of the leading causes of high speed RTOs<\/p><\/div>\n V1 has been redefined a number of times over the years and has ultimately ended up with the current FAA definition:<\/p>\n ‘…..V1 means the maximum speed in the take-off at which the pilot must take the first action (e.g., apply brakes, reduce thrust, deploy speed brakes) to stop the airplane within the accelerate-stop distance. V1 also means the minimum speed in the take-off, following a failure of the critical engine at VEF, at which the pilot can continue the take-off and achieve the required height above the take-off surface within the take-off distance….’<\/em><\/p>\n I know what you’re thinking – that\u2019s a lot of words.<\/em>\u00a0Which is why it is still casually referred to as ‘take off decision speed.’ It just rolls off the tongue better. But hidden amongst all those words is this key concept – by the time you reach V1, the decision must have already been made and the first action taken.<\/strong><\/p>\n Here is an easier way to put it: V1 is the end of the go\/no-go decision making process, not the beginning.\u00a0<\/strong><\/p>\n It may seem like a technicality, but it’s not. It has been shown<\/a> that with a balanced field length, if an RTO is initiated just two seconds after V1 an aircraft will exit the end of the runway at between 50 and 70kts. On average it takes pilots between 2-4 seconds to react. In other words, time is critical<\/strong>.<\/p>\n By V1, the decision needs to be made. Courtesy: Airbus<\/a><\/p><\/div>\n We know that the faster we\u2019re going, the more dangerous it is to stop. Which is why we become \u2018go-minded\u2019<\/strong> at higher speeds (usually above 80 or 100kts).\u00a0It is in our efforts to embrace this go-mindedness that we have adopted the philosophy that there are four things that could trigger a high speed abort: engine failure, engine fire, windshear or an unsafe condition.<\/strong> Makes sense right? We brief them every sector.<\/p>\n But what constitutes an unsafe condition? Or in other words, what are the signs that an airplane is unable to fly?<\/strong><\/p>\n Accident reports show that pilots are having difficulty recognising these conditions and that is leading them to stop above V1 when it would be safer to go<\/strong>. They often interpret anomalies (like a tire blow out) as events that threaten the safety of the flight and decide to reject at any speed.\u00a0The overrun of a Learjet departing KCAE\/Columbia Metro in 2008<\/a> serves as a tragic example.<\/p>\n In fact one study<\/a> found that almost half of all high speed rejected take-offs were the wrong decision.<\/strong> That\u2019s a startling statistic.<\/p>\n And to make matters worse, sometimes it\u00a0is\u00a0<\/em>the right decision as the accident of an MD-83<\/a> in 2017 certainly proved.<\/p>\n Sometimes the decision to reject above V1 can be the right one too.<\/p><\/div>\n Go\/No Go – if only it was as straight forward as it sounds. From a pilot’s perspective, it is difficult to make the right decision. Given any number of failures, the incredibly short timespan we have to make the decision and the lack of information at hand, it’s no wonder that that not all rejected take-offs go to plan.<\/p>\n But there is still room for improvement if we continue to train for them and brief them using lessons learned from accidents past.<\/p>\nThe Real World is Different<\/h4>\n
\n
![\"\"](\"https:\/\/ops.group\/blog\/wp-content\/uploads\/2021\/06\/LATAM-Airbus-A321-Bursts-Tyre-on-Landing.jpg\")
V1 is not a Decision Speed<\/h4>\n
![\"\"](\"https:\/\/ops.group\/blog\/wp-content\/uploads\/2021\/06\/Screen-Shot-2021-05-31-at-2.41.23-pm-1-1024x340.png\")
But there\u2019s more to it than that. What does \u2018unsafe to fly\u2019 actually mean?<\/h4>\n<\/div>\n
![\"\"](\"https:\/\/ops.group\/blog\/wp-content\/uploads\/2021\/06\/unnamed.jpg\")
The Decision Isn’t Easy<\/h4>\n<\/div>\n